A Hot glue guns is a very useful tool for joining materials modeling and even more will join him. 'Sticks' stuck in the back of the gun is pressed, press the trigger pressure forward and push the nozzle out melt glue. This glue is made of thermoplastic material. Thermoplastics are plastics that can be melted and formed when heated. Some suitable as an adhesive. There are various types of glue sticks, and this is fixed on the material chosen depends. Some of the glue stick better suited for wood, the other is for general bonding various materials.
The typical hot glue. Most of its pages removed, cut so that the heater can. Hot Glue guns must be turned on for five minutes or ten minutes before they are used. This allows the heater out and glue to heating. This glue is very hot and melt melts forever. At this stage can be attached to the materials used to be together. However, care must be too hot glue is very dangerous. Keep sticking your hands and fingers from S, driven out of the nozzle. When the glue is applied two pieces of material must be stapled together for a short time. G-clamp or otherwise which may be used for this purpose.